דבק Flobond שקוף (מסוג פיוז'ן) נטול חומצה

זהו דבק שקוף נטול חומצה לחלוטין הבא כיריעה בגלילים, בעובי של 50 מיקרון. דבק זה הינו עשוי דבק בשלמותו ונמס כולו בהדבקה חמה, הוא מדביק תוך כדי התקררותו.

ניתן להדביקו בחפיפה, או טלאים בטמפרטורת הדבקה של 79-93 מעלות צלסיוס במכבש חום. ניתן להסירו ע"י חימומו מחדש. זהו דבק לשמוש כללי המתאים להדבקה של תצלומים, בדים, תמונות, יש לו גם שמוש בתחום הרסטורציה של תמונות.

 

Flobond™ is a 2.0 mil (50 micron) carrier-free, "unsupported," heat-activated, pH-neutral mounting adhesive. Waste is significantly reduced as Flobond can be pieced together, overlapped, or patched with an activation temperature range between 175°F-200°F (79°C-93°C). Removal is possible by re-applying heat

SUGGESTED APPLICATIONS
Flobond will bond prints, posters, photographs, fabric, parchment, foils, etc., to a variety of substrates including mat boards, foam boards, particle boards and most metals

TIPS
Flobond is a versatile self-trimming mounting adhesive that can be used to mount items with irregular edges. Dried leaves, coins, doilies, etc., can be mounted by applying Flobond to the back of the item, laying it face-up on a sheet of release paper and covering it with kraft paper. Remove from the press and carefully separate. The Flobond will adhere to the back of the item while excess adhesive will be removed by the Kraft paper. Re-mount to your substrate in the usual manner

Removing Flobond:Place your mounted image between a sandwich of release paper and re-insert in your press at the usual temperature for approximately one minute. Upon removal, immediately but carefully, separate the image from the substrate by lifting one edge and peeling back. Do not continue to peel if you meet resistance. Instead, re-insert in the press. Repeat this step as many times as required to remove all of the Flobond.